Supports UHD resolutions up to 4K @ 60 Hz (4:4:4) for crystal-clear video. Extend touch screen ability for Interactive Flat Panel Displays. Carries High Dynamic Range (HDR) signals for rich contrast and expanded color accuracy. Power over Cable (PoC) technology provides power to the receiver via Cat6 cable. Transmitter's local port shows you the 4K image being displayed at the other end. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. HDMI Extender Kit Ideal for Digital Signage in Schools, Restaurants and Lecture Halls. This complete transmitter and receiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.. Extends a 4K A/V Transmission up to 230 ft....and More. The B127A-1A1-BHBH extends 4K signals from an HDMI source device to an HDMI display up to 230 feet away via user-supplied Cat6 cabling. By adding a B127A-010-H HDMI repeater or B127A-110-BH transceiver (sold separately) to the application, you can extend the signal up to 400 or 460 feet, respectively.. Dip Switches Extend Your Choice of Either USB or IR.. The DIP switches on both the transmitter and receiver can be adjusted to let you choose from the USB 1.1 or bi-directional IR functions. Choose to either control the source device via keyboard and mouse or IR remote control from the display end of the installation. Only one function can be extended at a time.. Transmits Crystal-Clear 4K Video with Multi-Channel Audio, HDR and 4:4:4 Color. The B127A-1A1-BHBH supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz, as specified by HDMI 2.0, with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. High Dynamic Range (HDR) provides a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks that pop on your 4K display. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.. Local HDMI Port on Transmitter Supports 4K @ 60 Hz Resolution. To monitor the video signal being extended to the receiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable. This port does not support multi-resolution capabilities, so the connected monitor must also support 4K/60 Hz to function properly.. Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks. Power over Cable (PoC) technology powers the transmitter or receiver over Cat6 cable. LEDs on both unit will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the unit where needed without worrying about finding a nearby AC outlet.. Plug-and-Play Operation for Quick Setup and Immediate Use. The included transmitter and receiver units work right out of the box with no software required. Mounting hardware is included for installing both units on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied HDMI cable (such as P568- or P569-Series). Then, connect the receiver to the display with another user-supplied HDMI cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as N202-Series).. TAA-Compliant for GSA Schedule Purchases. The B127A-1A1-BHBH is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.. Features. Type. AV transmitter & receiver. Maximum resolution. 3840 x 2160 pixels. Cable types supported. Cat5, Cat5e, Cat6, HDMI. Maximum transfer distance. 70.1 m. Maximum refresh rate. 60 Hz. Extended display identification data (EDID). Yes. Audio system. Multichannel. Audio output channels. 7.1 channels. Wall mountable. Yes. 3D. Yes. Consumer Electronics Control (CEC) support. Yes. Colour depth. 36 bit. Rack mounting. Yes. Material. Metal. LED indicators. Yes. Product colour. Black. Ports & interfaces. Connectivity technology. Wired. RJ-45 input ports. 1. RJ-45 output ports. 1. Number of HDMI outputs. 2. HDMI in. 1. USB ports quantity. 3. USB version. 1.1. USB connector type. Micro-USB, USB Type-A. Digital audio optical out. 1. Remote (IR) output. 2. Remote (IR) input. 2. DC-in jack. Yes. Power. AC input voltage. 100 - 240 V. AC input frequency. 50-60 Hz. Operating voltage. 24 V. Input current. 0.6 A. Output current. 1 A. Operational conditions. Operating relative humidity (H-H). 0 - 85%. Storage temperature (T-T). -15 - 50 °C. Operating temperature (T-T). 0 - 40 °C. Weight & dimensions. Receiver dimensions (WxDxH). 115 x 62.4 x 27 mm. Receiver weight. 450 g. Transmitter dimensions (WxDxH). 115 x 62.4 x 27 mm. Transmitter weight. 450 g. Packaging data. Package width. 260.1 mm. Package depth. 164.1 mm. Package height. 55.1 mm. Package weight. 660 g. Packaging content. AC adapter included. Yes. Cables included. IR. Included power plug types. AU, EU, NA, UK. Manual. Yes. Mounting kit. Yes. Technical details. Country of origin. Taiwan. Compliance certificates. CE, REACH, RoHS. Sustainability compliance. Yes. Logistics data. Master (outer) case width. 573 mm. Master (outer) case length. 273 mm. Master (outer) case height. 175 mm. Master (outer) case gross weight. 6.9 kg. Products per master (outer) case. 10 pc(s). Master (outer) case GTIN (EAN/UPC). 10037332258622. leaflet
This product would be ideal for professionals requiring a high-quality HDMI extender kit with KVM support, providing a flexible solution for extending HDMI connections to various displays while supporting 4K resolution, 4:4:4 color gamut, USB/IR connectivity, and HDR capabilities up to 230 feet.
