The Easy-Spray Pump Reviver is a specially formulated cleaner designed to remove limescale. and other deposits from pumps and accessories. It works quickly and effectively to enhance and extend the lifespan and performance of your pump. It helps ensure maximum performance and efficiency. especially before and after winter months when limescale and calcium deposits can build up. These deposits can affect the performance of all moving parts of the pump, such as the impeller shaft and bearings, potentially causing the pump to seize and burn out. The formula is specifically designed to lubricate these moving parts while cleaning and removing limescale and debris in and around your pump. Exterior of pump & Accessories: Remove pump from Pond or Aquarium. Spray the pump reviver and brush into parts not easily accessible. Wait 15 minutes and wash thoroughly with fresh water. Interior of Pump: Immerse the pump in a bucket or container containing 5 litres of water and add 250 ml of pump reviver. Allow the pump to run for 15 minutes. Rinse thoroughly with clean water and replace. If the pump cannot be removed from the water feature: Add the cleanser straight to the water where the pump is placed. Run the pump to circulate the cleaner through it.v Run clean water through the system to completely clean the pump. Wait until the pump is thoroughly clean and free of cleaner before using it with fish, plants, or wildlife. This assures the safety of all organisms that use the water. Top Tip: Cover bucket or container while pump is running. Reliably removes debris buildup, limescale, and other deposit buildups within 12 hours. Lubricates bearings, extends pump life, and improves pump performance. Environmentally Friendly & Biodegradable
